| Model |
SBPN-1212-02N |
SBPN-1224-02R |
SBPN-1248-02R |
|
Front
--Solar
--Fuse
--PoE Port (Out/Input)
--LED |
 |
|
|
|
Back
--12V/0.75A
--12V/0.75A
--Ground |
 |
|
|
|
Specifications |
|
Input |
|
Input Source
types |
Solar Panel |
|
PoE |
|
Battery |
|
Input Voltage |
Solar Panel |
18V ~ 36V
max. ( <= 180W) |
|
PoE |
18V ~ 57V (
35W~50W min ) |
|
Battery |
12V Lead Acid Battery ( > 26Ah) |
Note：recommend
the input voltage higher than 24V would be better. |
|
Output |
Output Voltage & Current
|
Model |
SBPN-1212-02N |
SBPN-1224-02R |
SBPN-1248-02R |
|
Output 1
(at rear term.) |
12V/1.5A
(as bat. volt.) |
12V/1.5A
(as bat. volt.) |
12V/1.5A
(as bat. volt.) |
|
Output 2
(at RJ45 upper) |
12V/1.5A
(as bat. volt.) |
24V/0.75A
(regulated) |
48V/0.35A
(regulated) |
|
|
Battery & PoE |
|
Battery
Charge Types |
Solar Panel |
Charge
current depends on the wattage
of the solar panel. |
|
PoE |
Fixed
current, 2.6A max. |
|
Battery Types |
12V Lead Acid
Battery |
|
PoE Input
Requirement |
35W ~ 50W
min. |
|
|
Protection |
|
Battery
Protection |
Cut off the
load when battery volt is lower than 11V±0.3V,
and auto reconnect to the load when battery volt return to 12V±0.3V. |
|
Other
Protections |
Battery
polarity reversal protection |
|
Battery over
discharge protection |
|
Battery over
charge protection |
|
Solar panel
polarity reversal protection |
|
Solar panel
over charge protection |
|
Output short
circuit protection |
|
PoE output
short circuit protection |
|
Battery
output current limited: Fuse |
|
|
Indicators |
|
Symbol |
Means |
Description |
|
POE |
PoE power
input indicator |
The LED
lights on when P2 PoE connector lower
jack with 18V ~ 57V input. |
|
SOL |
Solar power
input indicator |
The LED
lights on when SOL connector is
connected to solar panel with input voltage over 12V. |
|
CHA |
Charging
indicator |
The LED
lights on when battery is connected on
BAT connector and charging. |
|
LOA |
Loading
indicator |
The LED
lights on when the P3 output connector on
rear panel is connecting to a device and
offers power,
the nominal output voltage is 13V ~ 15V. |
|
REV |
Battery
reverse indicator |
The LED
lights on when the battery polarity is
reversed. |
|
|
Recommended
Operating
Conditions |
|
Operation
Temperature |
-25~ +45 ºC |
|
Storage
Temperature |
-40 ~ +85 ºC |
|
Operation
Humidity |
5% ~ 90% |
|
Cooling |
Free air
cooling |
|
|
RJ-45
Connector
and Pin-Out |
|
|
RJ-45 Input
(Data & Power) |
RJ-45 Output
(Data & Power) |
|
Pin
|
Symbol
|
Description
|
Symbol
|
Description
|
|
1
|
Rx+
|
Data Receive
|
Rx+
|
Data Receive
|
|
2
|
Rx- |
Data Receive
|
Rx- |
Data Receive
|
|
3
|
Tx+
|
Data Transmit
|
Tx+
|
Data Transmit
|
|
4
|
-Vdc_return(+)
|
Feeding
power(+) |
-Vdc_return(+)
|
Feeding
power(+) |
|
5
|
-Vdc_return(+)
|
Feeding
power(+) |
-Vdc_return(+)
|
Feeding
power(+) |
|
6
|
Tx- |
Data Transmit
|
Tx- |
Data Transmit
|
|
7
|
-V dc
|
Feeding
power(-) |
-V dc
|
Feeding
power(-) |
|
8
|
-V dc
|
Feeding
power(-) |
-V dc
|
Feeding
power(-) |
|
|
Mechanical & Dimension |
|
Plastic Case
Material |
PC |
|
Plastic Case
Finish |
Texture |
|
Plastic Case
Color |
Black |
|
Plastic Case
Dimension |
159 x 118 x
40 (L x W x H) mm |
Option for DIN Rail mounted
 |
|
Package |
|
Number of
unit in one Carton |
20
|
|
Weight and
Volume without Power cord |
T.B.D. |
|
White Box
Dimension |
270 x 160 x
45 (L x W x H) mm |
|
|
Installation Notice |
|
Items |
Description |
|
1 |
Connect the
battery to the P1 BAT terminal. Make sure the polarities are
correctly connected. Sequentially connect the solar panel to SOL
terminal
and connect PoE source to P2 RJ45 lower jack.
(If solar panel or PoE source is installed before the battery, and if the
polarity
of battery is reversed, then the fuse will be burnt.) |
|
2 |
Make sure the
output voltage of the solar panel was regulated, otherwise will
due to the output voltage on the P3 terminal of the prototype over
18V when
the model without battery be connected.
(mass production will be revised to be “cut off the output when the
voltage
on P3 terminal over 18V). |
|
